LIMFJORDEN

Fit dowels, cam bolts and glides to the left side (1)

Screw the three left cabinet runners on

Tap a dowel into one end of the three left rails

Stand the left side up and fit the left rails

Tap the dowels and a glide into the plinth

Fit the plinth along the bottom front and lock it

Tap three dowels into the middle panel (2)

Screw three cabinet runners onto the middle panel's left face

Screw three cabinet runners onto the middle panel's right face

Stand the middle panel on the plinth

Join the left rails through the middle panel

Tap a dowel into one end of the three right rails

Fit the right rails onto the middle panel and lock them

Tap a dowel into each end of the back rail (14)

Fit the back rail along the bottom of the back and lock it

Screw the back rail up into the middle panel

Fit dowels, cam bolts and glides to the right side (3)

Screw the three right cabinet runners on

Fit the right side and lock it

Tap two dowels and two glides into the middle foot (13)

Fit the foot under the back rail

Fit the cam bolts and the wall brackets under the top

Put the top on and lock it

Lay it on its front and put the two back panels in

Plate the backs together and nail them all round

Stand it up and fix it to the wall

Screw four cam bolts into each drawer front (do this 6 times)

Tap two dowels into the front end of each drawer side (do this 6 times)

Stand the sides on the front and lock them (do this 6 times)

Slide the bottom in (do this 6 times)

Tap two thin dowels into each end of the drawer back (do this 6 times)

Put the back on with two long allen screws (do this 6 times)

Screw the support bar in down the middle (do this 6 times)

Turn it upside down and screw on the drawer runners (do this 6 times)

Slide in all 6 drawers

Mind the load limits