LIMFJORDEN

Tap four dowels into the foot drawer's back (14)

Tap two dowels into each of its sides (16 and 17)

Fit the castors to the two battens (9) and dowel all three

Bolt the sides and the battens to the back

Screw five cam bolts into the foot drawer's front (13)

Slide the bottom in, put the front on and lock it

Tap four dowels into each side drawer's back (15) (do this 2 times)

Tap two dowels into each of its sides (18 and 19) (do this 2 times)

Fit a castor and four dowels to the middle batten (11) (do this 2 times)

Fit two castors and six dowels to each outer batten (10) (do this 2 times)

Bolt the battens to the back (do this 2 times)

Bolt the sides on (do this 2 times)

Screw five cam bolts into each side drawer's front (12) (do this 2 times)

Slide the bottom in, put the front on and lock it (do this 2 times)

Tap four dowels into the foot rail (3)

Fit three cam bolts and two glides to the corner piece (6)

Fit three cam bolts and two glides to the corner piece (7)

Join the corner pieces to the foot rail

Screw the slat ledge (8) behind the foot board

Join the two headboard panels (1 and 2)

Screw the angle bracket on and tap in three glides

Tap dowels and glides into the side frame (4)

Tap dowels and glides into the side frame (5)

Bolt the side frames to the headboard

Hook the foot board onto the side frames

Fit the two legs under the middle beam (22)

Lay the beam on the two angle brackets and screw it on

Turn the legs down to the floor

Slide in the three drawers

With slats: tap the four pins into the middle beam

Lay the slats and the mattress on